Passive vs Active PA Speakers: Understanding the Difference
Working with sound requires specialised equipment; this is true for studio recordings as much as live performances. While the basic components may be similar, the differences are fundamental and not to be overlooked.
The live audio setup, which could be a venue, an outdoor setting, a theatre, a conference room or a classroom, isn’t as controlled as the studio given the noise element, so a studio monitor isn’t going to cut it as a PA system and live performance speakers would.
What is a Live PA system?
PA, short for “public address”, is a system of electronic equipment designed to make sounds (e.g. live instruments, recorded tracks, speech) audible to a crowd by amplifying them and distributing them. This makes every bit of the system equally crucial for the final result:
- Microphones capture vocals and instruments and convert the sound into electrical signals. For live use, popular options include the Shure SM58 for vocals and the Shure SM57 for instruments such as acoustic guitar and drums. These microphones are designed to capture clear, focused sound while helping minimise unwanted background noise.
- Mixers receive signals from multiple sources, including microphones, instruments, and laptops, and allow you to balance and combine them into a cohesive mix. More advanced digital mixers can also provide built-in effects such as reverb, delay, and EQ. When choosing a mixer, consider the number of inputs and outputs you need, your budget, ease of use, and the features required for your setup.
- Amplifiers boost the audio signal by increasing its voltage and current to a level powerful enough to drive the speakers and produce audible sound for your audience.
- Speakers convert the electrical signals back into sound. The choice of active as opposed to passive speakers is going to influence whether or not you need an amplifier / powered mixer, which is the focus of this blog post.
- Cables connect all of these components and ensure signals travel reliably throughout the system. Using high-quality cables that are suitable for your microphones, mixer, amplifier, and speakers is essential for maintaining consistent, high-quality sound.
Passive or Active Speakers: Which Is Better?
There is an important difference between passive and active speakers, as each is designed for different applications and comes with its own advantages and drawbacks. Deciding which is better depends on understanding these differences and considering where and how you plan to use your PA system.
What Are Passive Speakers?
In simple terms, passive PA speakers are speakers without a built-in amplifier. They are often a good choice for mid-sized to large venues, live bands, DJs, and other setups where greater control over power and sound is required. For additional low-end depth and impact, a subwoofer can also be added to the system.
Behringer offers several popular passive speaker options, including:
- The Behringer PK115, a versatile option for mobile DJs, live bands, and houses of worship where both strong volume and full sound are important.
- The Behringer Eurolive VS1220, which features dual electro-dynamic drivers and is suitable for applications such as public speaking events, presentations, and small classes.
The Passive Speaker and Amplifier Connection
Passive speakers do not require their own mains or battery power, but they do need an external amplifier to provide the power needed to produce sound. You will also need suitable speaker cables to connect the amplifier to the speakers.
Speaker cables are specifically designed to carry the higher-power signal produced by an amplifier and are typically unshielded, unlike many microphone and instrument cables.
Common options include SpeakON cables, which use locking connectors that help prevent accidental disconnection during performances. Unshielded 1/4-inch TS speaker cables are also used in some simpler setups.
It is important to use proper speaker cables rather than shielded instrument or guitar cables. Instrument cables are not designed to carry high-power amplifier signals and may overheat, reduce performance, or potentially cause damage to your equipment.
Pros and Cons of Passive Systems
The need for an external amplifier gives passive speakers several standout advantages:
- Lighter speaker cabinets: Without a built-in amplifier, passive speakers are generally lighter, making them easier to transport, position, and install.
- More control over amplifier power: Because the amplifier is separate, you have greater flexibility when choosing an amp with the appropriate power output for your speakers and setup.
- Centralised sound control: With an external amplifier and hardwired speakers, adjustments can be made from a central control point rather than having to access and adjust each speaker individually.
- Well suited to permanent installations: Passive systems can be a practical choice for large venues, halls, and other permanent installations where amplifiers and hardwired speakers can remain securely installed for long periods.
- Easier to replace or upgrade individual components: Since the speakers and amplifiers are separate, a failed amplifier can be replaced without replacing the speakers, and speakers can be upgraded without changing the entire system. This also makes expansion easier. If your band moves from a small venue to a larger stage, for example, you can add suitable speakers and amplification to increase coverage.
In terms of cons, you can expect:
- More technical knowledge is required: You need to correctly match the speakers, amplifier, and cables to get the best performance and avoid costly mistakes. Pay close attention to amplifier power, speaker impedance measured in ohms, and the recommended wattage. Incorrect matching can result in poor sound quality and, in some cases, damage to the speakers or amplifier.
- Choosing the right cables is important: Speaker cable length and gauge can affect performance, particularly with longer cable runs. Using cables that are too thin for the distance and power requirements can increase resistance and reduce the amount of power reaching the speakers. Proper loudspeaker cables with an appropriate gauge can help minimise these losses.
What Are Active Speakers?
Active PA speakers, also known as powered speakers, have amplifiers built directly into the speaker cabinet. Because the amplification is already integrated, there is no need for a separate external amplifier. This makes active speakers a convenient option for beginners, smaller venues, events, solo performers, and anyone who wants a simpler PA setup.
Unlike passive speakers, active speakers require their own power source. Most connect to mains power, while some portable models can also operate on batteries. The main difference between active and passive speakers is therefore the built-in amplification.
Active speakers can usually be connected directly to passive mixers using balanced XLR or TRS cables. When setting up your system, check the mixer outputs and speaker inputs to make sure you are using the correct cable and connector type.
Yamaha’s DXS15 is an example of a powered PA subwoofer suited to applications such as community events, electronic music performances, live bands, and touring. Its portable design, strong bass response, and ability to handle low frequencies make it a useful addition when extra low-end impact is required.
Pros and Cons of Active Systems
The built-in amplifier gives active speakers several advantages:
- Easy to set up: As all-in-one units, active speakers remove the need to separately choose and match an amplifier. This makes them particularly user-friendly and suitable for anyone who wants a straightforward, ready-to-use PA system.
- Matched amplification: The built-in amplifier is designed specifically for the speaker, helping ensure the components work efficiently together without requiring you to calculate amplifier and speaker matching yourself.
- Fewer separate components: Because the amplifier is already built in, there is less equipment to purchase, connect, and transport. This can make active systems a practical choice for entry-level musicians, entertainers, presenters, and smaller venues.
- Convenient onboard controls: Many active speakers include level controls, EQ settings, and other adjustments directly on the rear panel, making it easy to fine-tune the sound at the speaker.
- Wireless Applications: Active speakers are more likely than power amplifiers to be portable (i.e. battery-powered), meaning that they can be used for things like busking.
In terms of cons, you can expect:
- They can be heavier: The built-in amplifier and power supply add weight to the speaker cabinet, which can make active speakers heavier than comparable passive models.
- Repairs can be less convenient: Because the amplifier and speaker are housed in the same cabinet, a fault with the amplifier may require the entire speaker to be taken in for repair. For regular performances or events, having a backup speaker can therefore be useful.
FAQs
Can I use passive and active speakers together?
While it’s possible, you should treat them as separate systems because of the active vs passive speakers amplifier difference. To get the best results in a simple and safe way, look for a mixer with two separate outputs to connect to the active (with XLR cables) and the passive speakers (with the dedicated external amplifier).
What happens if I plug a passive speaker into a mixer without an amp?
If it’s a standard, unpowered mixer, you shouldn’t expect there to be much of a sound to begin with since this one is typically made for line-level signal output. This is because the passive speakers don’t have a built-in amp, and the mixer’s output isn’t amplified enough to drive a speaker. For actual sound, you’d need an amp or a powered speaker.
Are passive speakers obsolete now?
It’s true, active speakers are dominating the market and gaining more popularity over the years for the convenience, but that doesn’t make passive speakers any less important. In fact, many large concert systems use separate amps and passive speakers for safety, flexibility with the customisation of the system setup, and the ease of fine-tuning.

