How to Restring Your Guitar (Acoustic & Electric) – Step-by-Step Guide
> 24 August 2026
Are your guitar strings starting to sound a bit dull, feeling a bit rough to the touch or struggling to stay in tune? Yeah, that's probably a sign it's time to swap them out for a fresh string set. Don't worry, you don't need to be some sort of expert to do it - just a few basic tools, a bit of patience, and some decent technique.
When and Why to Change Your Strings
Knowing when to change your guitar strings is just as important as knowing how to do so. There's no magic schedule for string changes; it pretty much depends on how often you play, where you keep your guitar, and what kind of strings you are currently using.
Some of the most common signs that your strings are due for a change include:
- A dull and lifeless tone that just doesn't have the same zest and clarity.
- You find it's getting harder and harder to keep your guitar in tune - even when you've gone through the whole proper tuning process.
- Visible signs of rust, corrosion, or discolouration on the strings themselves.
- The strings feel a bit rough, sticky, or just generally uncomfortable to play on.
- Fraying or flattened spots where the strings meet the frets.
To give you a rough guide, if you play your guitar a lot, then you might need to change your strings every few weeks or so. If you're a bit more casual, then you might be able to stretch it out for several months between changes. Using long-life coated strings, like the ones from Elixir, can stretch this time out further, and the coating helps to prevent the rust / corrosion process. Listen to your ears and your fingers. If the guitar no longer sounds or feels its best, it's probably time to fit a new set of strings.
Tools You'll Need - Before You Start
Before you get started restringing your guitar, it's a good idea to gather all your tools together. It'll save you a lot of time and frustration in the long run, especially if this is your first time changing strings.
Here are the basic tools you'll need:
- A new set of guitar strings. Make sure to get the right type for your guitar - unless you have a classical nylon string acoustic (which needs nylon strings), acoustic guitars are usually fine with steel acoustic strings, while electric guitars need electric guitar strings. If you're happy with how your guitar feels and sounds, you can just stick with the same gauge of string you've been using.
- A string winder. This is a really handy tool that makes loosening and tightening the strings a whole lot faster. Some string winders even come with a bridge pin puller, which is super useful for acoustic guitars.
- Wire cutters, which are often bundled with other maintenance accessories in care kits. Once your new strings are fitted, you'll need these to trim the excess string from the tuning posts so you end up with a nice tidy finish.
- A guitar tuner. This is essential after restringing. New strings will stretch out and you'll need to do a few rounds of tuning before they settle. You can use a clip-on tuner, pedal tuner, a tuning app - whatever tuner works best for you. While apps are convenient, they’re generally not as accurate as a dedicated tuner, because the apps pick up ambient and background noise, whereas a pedal works off the electrical signal of the instrument, and a clip-on tuner works through vibration.
- A soft cloth. With the old strings off, now's the perfect time to give the fretboard and body a quick tidy with some dusting and wiping down. Using a fretboard cleaner / conditioner / oil / wax can keep your fretboard healthy, and help to avoid dried or even cracked fretboards. You can also use guitar polish to make it a bit easier to keep your finish and hardware squeaky clean (especially if it’s been a while between string changes). Just make sure to use a nitro-friendly finish on older or higher end instruments which generally have a nitrocellulose finish.
Once you've got all your tools, you're ready to go. The exact process of restringing your guitar does depend on whether you have an acoustic or electric guitar.
Acoustic Guitars
Restringing an acoustic guitar is not that hard once you get the hang of it. If it's your first time, take it easy and do one string at a time. This lets you keep a bit of tension on the neck and bridge, and makes it less confusing trying to work out where each string belongs. Some brands, like D’Addario, colour-code the ball-end of their strings to make this process even easier.
It’s worth noting that the process below is very similar if you use ball-end nylon strings, which most classical acoustic guitars will accept. The main difference is at the headstock.
Classical guitars usually have a slotted headstock with sideways-facing machine heads, so you’ll need to feed each string through the hole in the roller before winding it neatly around the roller. If you’re set on using traditional tie-end nylon strings, it’s best to ask someone experienced for help, as tying them securely at the bridge can be a finicky process.
Step 1: Remove the Old Strings
Start by loosening each string with the tuning pegs until they're as loose as they're going to get. A string winder makes this bit a whole lot easier.
Once your strings are loose, carefully pull out the bridge pins from the bridge. If your string winder came with a bridge pin puller, use that - it makes it a heck of a lot easier to get them out without damaging the guitar (even better, put your polish cloth between the bridge pin puller and the bridge, which will help cushion the force and provide extra protection for bridges made of softer woods). Don't try to force the pins out, either, as that can cause cracks or chips around the bridge - and that's just a nightmare.
Once the bridge pins are out, pull the strings loose from the bridge and unwind them from the tuning posts.
Step 2: Give the Fretboard a Good Wipe
Now you've got the strings out of the way, take the chance to give the guitar a good clean. Grab a soft cloth and give the fretboard, headstock and bridge area a good wipe down to get rid of all the dust and dirt that's built up. In a lot of countries, you can skip fretboard oil, but Australia has some pretty dramatic temperature and humidity changes, so oiling / waxing the fretboard keeps it hydrated, protecting it from drying out too much and running across issues like cracks.
Step 3: Install the New Strings
Take a new string and stick the ball end in the bridge hole. Then pop the bridge pin back in, making sure the groove lines up with the string. Give the string a gentle tug while pressing down on the bridge pin, just to make sure the ball end is properly seated.
Next, thread the other end of the string through the corresponding tuning post and leave a bit of slack - I find about 5-8cm works pretty well. Just leave it loose enough to make a few neat wraps around the post.
Now it's time to start winding the tuning peg. Get the wraps going downhill towards the face of the headstock. This helps get a good break angle over the nut, which is one of the things that keeps your guitar in tune.
Just repeat the whole process for each string.
Step 4: Chop Off the End of the String
Once you've got each string all wound up and holding tension, grab a pair of wire cutters and chop off the excess string that's poking out of the tuning post. Just leave a bit beyond the final wrap, so it doesn't come loose on you.
Chopping off the end of the string makes your guitar look a lot neater, and it also stops you from getting your fingers caught on sharp bits of string.
Step 5: Tune Up and Stretch Your Strings
Now it's time to get your guitar in tune. Use a decent tuner to get each string spot on, but don't be too surprised if it takes a while - new strings will always stretch a bit.
Once you've got them all in tune, give each one a bit of a stretch by lifting it up off the fretboard. Then tune it up again, and repeat the process a few times until the strings start holding their pitch.
Restringing an Electric guitar
When it comes to restringing an electric guitar, the basic principles are the same as for an acoustic. However, there are a couple of things to bear in mind depending on the type of bridge your guitar is fitted with. Most electric guitars have a hardtail bridge, where the strings just feed through the back of the bridge or body, or they have a tremolo bridge - which lets you raise or lower the pitch if you fancy it with a whammy bar.
You can replace the strings one at a time or remove them all at once. If you haven't restrung many guitars before, changing one string at a time is usually the easiest option, as it helps keep the tension under control and makes it easier to keep track of where everything goes. Removing all the strings at once is also fine on most hardtail guitars and gives you better access when cleaning the fretboard and hardware.
Step 1: Removing the Old Strings
Start by loosening each string up using the tuning pegs until they're completely slack. Then you can unwind them from the tuning posts.
With a hardtail-type guitar, you can just pull the string out the back of the bridge or out the back of the guitar if it's a string-through-body design. You can then fit its replacement before moving on to the next string, or remove the remaining strings if you're changing them all at once.
But with a tremolo-equipped guitar, be careful not to change the bridge tension all of a sudden - that can cause some problems. If your guitar has a floating tremolo system (like a Floyd Rose), it's especially important to change one string at a time to keep the bridge balanced.
Step 2: Cleaning the Guitar
Once you've removed a string, or all of the old strings if you're changing them together, take a soft cloth and use it to wipe down the fretboard, pickups and the bridge - that's a great time to get rid of any dust and dirt that can build up in hard-to-reach places.
Removing all the strings will give you easier access for a more thorough clean, but you can still wipe down each exposed section as you work if you're replacing them one at a time.
Step 3: Putting the New Strings On
Insert each new string through the bridge or the back of the guitar, then pull it up to the corresponding tuning post. Thread the string through the tuning post hole, leaving about 5 to 8 centimetres of slack. Then start winding the tuning peg, making sure each wrap sits neatly below the last one. That helps create the right break angle over the nut and improves the tuning stability.
If you've got locking tuners, it's even simpler - just thread the string through the tuner, tighten the locking mechanism and wind. Because the string is clamped in place, you won't need much slack and you can get away with fewer wraps. Do that for each string.
Step 4: Cutting the Excess String
After you've got every string securely attached and under light tension, get out your wire cutters and trim away the excess from each tuning post. That keeps your guitar looking tidy, and stops any sharp string ends from catching your hands or clothes.
Step 5: Stretching and Tuning the Strings
Get out your guitar tuner and bring each string up to pitch, gradually. Like acoustic strings, new electric strings need a bit of time to settle - so gently pull each string slightly away from the fretboard at several points along its length. Then retune and repeat the process until the strings hold their tuning consistently.
If your guitar has a floating tremolo bridge, you may notice the bridge shifting slightly as you tune each string. This is normal, and it may take a few rounds of tuning before the bridge returns to its proper position and all the strings stay in tune.

