Calculate Shipping
Promotion ends in

Peavey Invective.120 Invective Series 120W Valve Guitar Amp Head Black

Includes 10-Button Footswitch
$2,851.00
RRP $3,699.00
Brisbane:
Ships from external warehouse within 48hrs Ships From Warehouse
Calculate Shipping

Watch video

 

Misha Mansoor-Designed High-Gain Power with Serious Pedalboard Integration

The Peavey Invective.120 was developed in collaboration with Misha Mansoor of Periphery, and that modern progressive-metal influence runs right through the amp. Its 120-watt all-valve platform uses four matched 6L6GC power valves and six gain-matched 12AX7 preamp valves, with three footswitchable channels covering pristine cleans, muscular crunch and the kind of tight, saturated high gain the Invective name is built around.

The Clean channel is deliberately more than an afterthought, giving pedals a clear, open foundation rather than forcing everything through a heavily coloured preamp. Crunch and Lead each have independent pre- and post-gain controls with shared three-band EQ, while switchable boost and fast-attack noise-gate functions help tighten high-gain sounds before they reach the power section. Master Presence and Resonance then let you shape the upper bite and low-end response of the whole amp.

The rear panel is unusually well equipped for complex rigs. Two remote-switchable effects loops let you separate different groups of pedals, while two 9V DC / 500mA outputs can power effects directly from the amp. MIDI connectivity and the included footswitch give you access to nine presets, making it much easier to move between complete channel, boost, gate and loop combinations on stage.

Peavey’s MSDI direct output provides an XLR feed for recording or front-of-house use, with dedicated level, tone and ground-lift controls. Parallel speaker outputs support 4Ω, 8Ω and 16Ω loads, while a half-power switch gives you another option when the full 120 watts is unnecessary. Top-mounted bias test points and adjustment also make valve maintenance more accessible.

At Riffs & Licks Music, we think the Invective.120 makes the most sense for players running demanding modern rigs who want huge gain without sacrificing clean headroom or pedalboard flexibility. Misha Mansoor’s influence is obvious in the tight high-gain architecture, but the dual effects loops, MIDI control, pedal power and genuinely clean channel make it far more versatile than a single-purpose metal machine.

Features / Specifications

Feature Specification
Amplifier Type All-Tube Guitar Amplifier
Rated Power 120W RMS into 4, 8 or 16Ω
Power at Clipping 130W RMS into 4, 8 or 16Ω (Typically at 5% THD, 1 kHz and 120V AC Line; Bias Must Be Reduced to Measure)
Power Modes Full Power
Half Power
Channels 3 - Clean, Crunch, Lead (Remote Switchable)
Preamp Valves 6 x Gain-Matched 12AX7
Power Amp Valves 4 x Matched JJ 6L6GC
Frequency Response +0/−3 dB, 50 Hz – 20 kHz at 100W RMS into 8Ω
Power Amplifier Hum and Noise Greater Than 78 dB Below Rated Power
Power Amp EQ Active Presence: +10 dB at 2 kHz
Active Resonance: +10 dB at Cabinet Resonant Frequency
Preamp Input Impedance 470 kΩ
System Hum and Noise Greater Than 78 dB Below Rated Power at Nominal Level (Clean Channel, 20 Hz – 20 kHz, Unweighted)
Equalisation Custom Low, Mid and High Passive-Type EQ
Clean Channel Controls Gain
Low
Mid
High
Post Gain
Crunch and Lead Channel Controls Independent Pre Gain and Post Gain
Shared Low, Mid and High EQ
Master Controls Master Resonance
Master Presence
Master Volume
Boost Circuits Clean Channel: Boost Drive and Tone (Remote Switchable)
Crunch and Lead Channels: Boost Level and Tone (Remote Switchable)
Switchable Front-End Boost for Crunch and Lead Channels
Noise Gate Fast-Attack Noise Gate with Adjustable Threshold for Crunch and Lead Channels (Remote Switchable)
Effects Loops 2 x Remote-Switchable Loops (Effects Loop and Rack Loop)
Effects Send Load Impedance: 1 kΩ or Greater
Nominal Output: −10 dBV, 300 mV RMS
Effects Return Input Impedance: 470 kΩ
Designed Level: −10 dBV, 300 mV RMS
Direct Output MSDI Direct Output with Level, Tone and Ground Lift Controls
Instrument Input 1 x Input
MIDI Connectivity MIDI / Footswitch Input
MIDI Out/Thru
Speaker Outputs Paralleled Speaker Outputs with Impedance Selector
Speaker Impedance 4Ω, 8Ω or 16Ω (Selectable)
Auxiliary Power Outputs 2 x 9V DC, Negative-Tip Jacks Rated at 500 mA
Switches Power
Standby
Half Power
Channel Select (Remote Switchable)
Indicators Channel Selection Bullet LEDs
Blue Jewelled Pilot Light
Bias Adjustment Top-Loaded Bias Test Points and Adjustment
Power Consumption 400W, 50/60 Hz, 120V AC (Domestic)
Width 678 mm (26.7")
Depth 300 mm (11.8")
Height 254 mm (10.0")
Weight 21.9 kg (48.3 lbs)
Included Accessories Footswitch with 9 Presets
Design Collaboration Misha Mansoor (Periphery)

(PVINVECTIVE120)

Be the first to review this product!

Help other shoppers by writing reviews for products you have purchased.

Write a review

Calculate Shipping