Setting Up a PA System: A Beginner’s Guide to Live Sound

You've spent countless hours tucked away in your bedroom or home studio perfecting your songs, messing around with your sound and getting everything just right. Now, you're feeling ready to share your talent with the world and let people actually hear what you can do. To make that happen, you'll need a way to get your sound out there and to the people who'll be listening. That's where a PA system comes in. 

A PA system isn't just one piece of equipment. It's a combination of components that work together to take the sound coming from your microphone or instrument and send it out loud and clear to the people in the room. 

You don't need a fancy professional setup to get started either. For a small gig or a solo performance, a beginner can keep things pretty simple with a basic mixer, a couple of powered speakers, a decent microphone and the right cables. Below, we'll break down the different parts and how they all fit together, so you can get to grips with how to set up a PA system.

 

PA System Components Explained

 

Mixer

Think of the mixer as the control centre for your PA system. It takes in all the different audio inputs - mic, guitar, keyboard or backing tracks - and lets you tweak the volume and balance for each one on its own so that everything sounds the way you want it.

For a beginner, a small, easy-to-use multi-channel mixer is usually more than enough. You won't need anything fancy if you're just using a vocal mic and one or two instruments, so a small setup from a reputable brand like Yamaha or Presonus will usually cover your needs.

 

Just make sure to select the correct type of mixer. A passive mixer matches with an active / powered speaker, and a powered mixer matches with a passive speaker. Connecting the wrong types together can be dangerous and damage your equipment.

 

Speakers

Your speakers are where the real magic happens - they're what actually blast your performance out to the audience. If you're setting up a small PA for the first time, powered speakers can be a really convenient option, because they come with a built-in amplifier so you don't need to buy and connect a separate power amp.

When you're choosing powered PA speakers, just make sure you pick a pair that's got enough oomph to fill the space you're playing in. For a small gig, rehearsal room or intimate performance, a pair of powered speakers should give you a straightforward setup without any unnecessary extras. If you need to connect more instruments than the powered speakers have inputs for, a small passive mixer is a great idea as well.

 

Microphone

If you're singing live, you'll need a microphone to get your voice into the PA system. For most beginners, a dynamic vocal mic is a good place to start. They're designed for live use and are usually pretty easy to set up.

 

We've got a wide selection of stage and vocal microphones on offer from brands like Shure and Sennheiser. If you're also playing an acoustic guitar, drums or some other instrument, you may need a microphone specifically designed for that job, though.

 

Cables 

Cables may not be the most glamorous part of your setup, but let's face it, without them, your system is going nowhere fast. They're the unsung heroes that connect your mic and instruments to the mixer and get the audio signal from one component to the next.

As a beginner, you're likely to need some XLR's for plugging your vocal mics into, and then suitable cables for the rest of the system - the good news is that they're not all the same. Don't make the rookie mistake of assuming all audio cables are swap-out-able - make sure you get the right one for the job.

 

Power Amplifier - it's not always necessary

This is one of those areas where PA systems can seem more complicated than they need to be.  If you go for powered speakers, the amplification's already built into the speaker, so you can pretty much plug your mixer straight in. If you opt for passive speakers, though, you'll need a separate power amp stuck between the mixer and the speakers.

For first-timers setting up their own PA, powered speakers can be a pretty good starting point. As your system gets bigger and more complicated, a separate amp and passive speaker might be a more sensible option, though.

 

Setting Up a PA System 

At first glance, putting everything together might look like a right old headache, but stick to a few simple steps and you'll be golden. The key is to plug, check and double-check each bit as you go along, from setting up your speakers and mics to getting your levels just right.

 

Step 1: Positioning Your Speakers and Mics

Before you even start plugging in, get your speakers and mics in the right place. This makes all the difference to the sound quality and helps prevent that dreadful feedback - you know, the one where it starts squealing?

The general rule of thumb is to have your speakers in front of the mics, with their faces pointing away from them. For small gigs, one speaker on either side of the stage usually does the trick. 

Use stands if you need to get the speakers up high, so the sound can travel more evenly across the room. One other thing: keep your mics at a safe distance and don't point them at the speakers while you're performing.

 

Step 2: Connecting the Mixer to the Speakers

How you plug your mixer into your speakers depends on whether you're using powered or passive speakers.

With powered speakers, just plug the main outputs from your mixer straight into the speaker inputs - no need for a separate power amp. You'll probably be using an XLR for this one.

If you do go for passive speakers, however, you'll need a power amp stuck between the mixer and the speakers. Connect your mixer's main outputs to the amplifier, then the other end of the power amp to the passive speakers - use speaker cables for this.

Before you even think about turning anything on, double-check that your cables are plugged into the right inputs and outputs. Oh, and one last thing - keep your volume levels right down while you're making connections.

 

Step 3: Setting  Up The Mics & Inputs 

Now that we've got all the gear out, it's time to start hooking it all up. Connect your mics and instruments to that mixing board, making sure you use the right channels. 

Typically, vocal mics use XLR cables, but unless you're using something particularly unusual in your band, most instruments will use different sorts of connections. Guitars and keyboards all use different jacks. Guitars typically use instrument cables. Keyboards will typically require either a TRS cable or dual TS cable, but this depends on the particular model, so check your user manual to make sure.

Get your channels sorted so you can keep track of which one controls which mic or instrument. You'll probably want one channel for vocals, another for the guitar and another for a keyboard or playback device. Maybe a couple more depending on how many people you've got on stage.

Some instruments do require a DI box to get along with your mixer, but most of the time you won't need that for a beginner rig. Check what your particular instrument needs, though - it's not worth trying to do it the hard way and risking a world of trouble.

 

Step 4: Sound Check - Levels & EQ 

Now you've got everything plugged in, it's time to do a soundcheck. First up, crank up the gain or trim on each channel. See how the performer does it on the mic - do they play at full blast or just soft? Then start cranking up the gain until you hit the right level. 

Keep an eye on those level indicators - and for goodness sake, avoid the clip light. That's just asking for trouble.

Then, slowly bring up the master volume and try a few things out. Play that keyboard, see how the guitar sounds. Check each mic and instrument by itself before you start combining all the sounds.

Next bit is EQ. For vocals, you want to get rid of any low end that you don't need - that can make the sound muddy if it's all rumbled up. But on the other hand, too much treble and it'll sound harsh. Smallest adjustments usually do the trick.

 

Troubleshooting Common Sound Issues

If you get no sound, check that the mixer, speakers or amp are all switched on. Double-check all the cables - is that jack stuck in, or is the XLR loose? If none of that works, check that your levels are up and that the correct channels are unmuted.

Feedback - that's just a pain, and it usually means you need to lower the volume a bit or get the mic away from the speakers a bit. Check that those speakers are in the right place in front of the mics, and make a few tiny tweaks to the EQ.

And lastly,  if the sound is all distorted and nasty, that's usually because your channel levels are clipping. Just lower the gain a bit, and that should sort it out.